17 KiB
QUIC ACK Manager
The QUIC ACK manager is responsible for, on the TX side:
- Handling received ACK frames
- Generating notifications that a packet we sent was delivered successfully
- Generating notifications that a packet we sent was lost
- Generating requests for probe transmission
- Providing information on the largest unacked packet number so that packet numbers in packet headers can be encoded and decoded correctly
On the RX side, it is responsible for:
- Generating ACK frames for later transmission in response to packets we received
- Providing information on whether a given RX packet number is potentially duplicate and should not be processed
In order to allow it to perform these tasks, the ACK manager must:
- be notified of all transmitted packets
- be notified of all received datagrams
- be notified of all received packets
- be notified of all received ACK frames
- be notified when a packet number space is discarded
- be notified when its loss detection deadline arrives
The ACK manager consumes:
- an arbitrary function which returns the current time;
- a RTT statistics tracker;
- a congestion controller.
The ACK manager provides the following outputs:
-
It indicates the current deadline by which the loss detection event should be invoked.
-
It indicates when probes should be generated.
-
It indicates what ACK frames should be generated.
-
It indicates the current deadline by which new ACK frames will be generated, if any.
-
It indicates the largest unacknowledged packet number for a given packet number space.
-
It calls a callback for each transmitted packet it is notified of, specifying whether the packet was successfully acknowledged by the peer, lost or discarded.
-
It may communicate with a congestion controller, causing the congestion controller to update its state.
-
It may communicate with a RTT statistics tracker, causing it to update its state.
In this document, “the caller” refers to the system which makes use of the ACK manager.
Utility Definitions
There are three QUIC packet number spaces: Initial, Handshake and Application Data.
/* QUIC packet number spaces. */
#define QUIC_PN_SPACE_INITIAL 0
#define QUIC_PN_SPACE_HANDSHAKE 1
#define QUIC_PN_SPACE_APP 2
#define QUIC_PN_SPACE_NUM 3
Packet numbers are 62-bit values represented herein by QUIC_PN.
QUIC_PN_INFINITE evaluates to an invalid QUIC packet number value.
/* QUIC packet number representation. */
typedef uint64_t QUIC_PN;
#define QUIC_PN_INFINITE UINT64_MAX
Instantiation
The QUIC ACK manager is instantiated as follows:
typedef struct ossl_ackm_st OSSL_ACKM;
OSSL_ACKM *ossl_ackm_new(OSSL_TIME (*now)(void *arg),
void *now_arg,
QUIC_STATM *statm,
OSSL_CC_METHOD *cc_method,
OSSL_CC_DATA *cc_data);
void ossl_ackm_free(OSSL_ACKM *ackm);
The function pointer now is invoked by the ACK manager to obtain the current
time. now_arg is passed as the argument. The congestion controller method and
instance passed are used by the ACK manager instance. statm points to a
Statistics Manager tracker instance.
Events
The ACK manager state is evolved in response to events provided to the ACK manager by the caller.
On TX Packet
This must be called when a packet is transmitted. It does not provide the payload of the packet, but provides metadata about the packet which is relevant to the loss detection and acknowledgement process.
The caller is responsible for the allocation of the structure and the structure must remain allocated until one of the callbacks is called or the ACK manager is freed. It is expected this structure will usually be freed (or returned to a pool) in the implementation of either callback passed by the caller.
Only exactly one of the callbacks in the structure will be called over the
lifetime of a OSSL_ACKM_TX_PKT, and only once.
Returns 1 on success.
typedef struct ossl_ackm_tx_pkt_st {
/* The packet number of the transmitted packet. */
QUIC_PN pkt_num;
/* The number of bytes in the packet which was sent. */
size_t num_bytes;
/* The time at which the packet was sent. */
OSSL_TIME time;
/*
* If the packet being described by this structure contains an ACK frame,
* this must be set to the largest PN ACK'd by that frame.
*
* Otherwise, it should be set to QUIC_PN_INVALID.
*
* This is necessary to bound the number of PNs we have to keep track of on
* the RX side (RFC 9000 s. 13.2.4). It allows older PN tracking information
* on the RX side to be discarded.
*/
QUIC_PN largest_acked;
/*
* One of the QUIC_PN_SPACE_* values. This qualifies the pkt_num field
* into a packet number space.
*/
unsigned int pkt_space :2;
/* 1 if the packet is in flight. */
unsigned int is_inflight :1;
/* 1 if the packet has one or more ACK-eliciting frames. */
unsigned int is_ack_eliciting :1;
/* 1 if the packet is a PTO probe. */
unsigned int is_pto_probe :1;
/* 1 if the packet is an MTU probe. */
unsigned int is_mtu_probe :1;
/* Callback called if frames in this packet are lost. arg is cb_arg. */
void (*on_lost)(void *arg);
/* Callback called if frames in this packet are acked. arg is cb_arg. */
void (*on_acked)(void *arg);
/*
* Callback called if frames in this packet are neither acked nor lost. arg
* is cb_arg.
*/
void (*on_discarded)(void *arg);
void *cb_arg;
/* (Internal use fields are appended here and must be zero-initialized.) */
} OSSL_ACKM_TX_PKT;
int ossl_ackm_on_tx_packet(OSSL_ACKM *ackm, const OSSL_ACKM_TX_PKT *pkt);
On RX Datagram
This must be called whenever a datagram is received. A datagram may contain
multiple packets, and this function should be called before the calls to
ossl_ackm_on_rx_packet.
The primary use of this function is to inform the ACK manager of new credit to
the anti-amplification budget. Packet and ACK-frame related logic are handled
separately in the subsequent calls to ossl_ackm_on_rx_packet and
ossl_ackm_on_rx_ack_frame, respectively.
Returns 1 on success.
int ossl_ackm_on_rx_datagram(OSSL_ACKM *ackm, size_t num_bytes);
On RX Packet
This must be called whenever a packet is received. It should be called after
ossl_ackm_on_rx_datagram was called for the datagram containing the packet.
Returns 1 on success.
#define OSSL_ACKM_ECN_NONE 0
#define OSSL_ACKM_ECN_ECT1 1
#define OSSL_ACKM_ECN_ECT0 2
#define OSSL_ACKM_ECN_ECNCE 3
typedef struct ossl_ackm_rx_pkt_st {
/* The packet number of the received packet. */
QUIC_PN pkt_num;
/* The time at which the packet was received. */
OSSL_TIME time;
/*
* One of the QUIC_PN_SPACE_* values. This qualifies the pkt_num field
* into a packet number space.
*/
unsigned int pkt_space :2;
/* 1 if the packet has one or more ACK-eliciting frames. */
unsigned int is_ack_eliciting :1;
/*
* One of the OSSL_ACKM_ECN_* values. This is the ECN labelling applied
* to the received packet. If unknown, use OSSL_ACKM_ECN_NONE.
*/
unsigned int ecn :2;
} OSSL_ACKM_RX_PKT;
int ossl_ackm_on_rx_packet(OSSL_ACKM *ackm, const OSSL_ACKM_RX_PKT *pkt);
On RX ACK Frame
This must be called whenever an ACK frame is received. It should be called
after any call to ossl_ackm_on_rx_packet.
The ranges of packet numbers being acknowledged are passed as an argument.
pkt_space is one of the QUIC_PN_SPACE_* values, specifying the packet number
space of the containing packet. rx_time is the time the frame was
received.
This function causes on_acked callbacks to be invoked on applicable packets.
Returns 1 on success.
typedef struct ossl_ackm_ack_range_st {
/*
* Represents an inclusive range of packet numbers [start, end].
* start must be <= end.
*/
QUIC_PN start, end;
} OSSL_ACKM_ACK_RANGE;
typedef struct ossl_ackm_ack {
/*
* A sequence of packet number ranges [[start, end]...].
*
* The ranges must be sorted in descending order, for example:
* [ 95, 100]
* [ 90, 92]
* etc.
*
* As such, ack_ranges[0].end is always the highest packet number
* being acknowledged and ack_ranges[num_ack_ranges-1].start is
* always the lowest packet number being acknowledged.
*
* num_ack_ranges must be greater than zero, as an ACK frame must
* acknowledge at least one packet number.
*/
const OSSL_ACKM_ACK_RANGE *ack_ranges;
size_t num_ack_ranges;
OSSL_TIME delay_time;
uint64_t ect0, ect1, ecnce;
/* 1 if the ect0, ect1 and ecnce fields are valid */
char ecn_present;
} OSSL_ACKM_ACK;
int ossl_ackm_on_rx_ack_frame(OSSL_ACKM *ackm, const OSSL_ACKM_ACK *ack,
int pkt_space, OSSL_TIME rx_time);
On Packet Space Discarded
This must be called whenever a packet number space is discarded. ACK-tracking
information for the number space is thrown away. Any previously provided
OSSL_ACKM_TX_PKT structures have their on_discarded callback invoked,
providing an opportunity for them to be freed.
Returns 1 on success.
int ossl_ackm_on_pkt_space_discarded(OSSL_ACKM *ackm, int pkt_space);
On Handshake Confirmed
This should be called by the caller when the QUIC handshake is confirmed. The Probe Timeout (PTO) algorithm behaves differently depending on whether the QUIC handshake is confirmed yet.
Returns 1 on success.
int ossl_ackm_on_handshake_confirmed(OSSL_ACKM *ackm);
On Timeout
This must be called whenever the loss detection deadline expires.
int ossl_ackm_on_timeout(OSSL_ACKM *ackm);
Queries
These functions allow information about the status of the ACK manager to be obtained.
Get Loss Detection Deadline
This returns a deadline after which ossl_ackm_on_timeout should be called.
If it is OSSL_TIME_INFINITY, no timeout is currently active.
The value returned by this function may change after any call to any of the event functions above is made.
OSSL_TIME ossl_ackm_get_loss_detection_deadline(OSSL_ACKM *ackm);
Get ACK Frame
This returns a pointer to a OSSL_ACKM_ACK structure representing the
information which should be packed into an ACK frame and transmitted.
This generates an ACK frame regardless of whether the ACK manager thinks one
should currently be sent. To determine if the ACK manager thinks an ACK frame
should be sent, use ossl_ackm_is_ack_desired, discussed below.
If no new ACK frame is currently needed, returns NULL. After calling this function, calling the function immediately again will return NULL.
The structure pointed to by the returned pointer, and the referenced ACK range
structures, are guaranteed to remain valid until the next call to any
OSSL_ACKM function. After such a call is made, all fields become undefined.
This function is used to provide ACK frames for acknowledging packets which have
been received and notified to the ACK manager via ossl_ackm_on_rx_packet.
Calling this function clears the flag returned by ossl_ackm_is_ack_desired and
the deadline returned by ossl_ackm_get_ack_deadline.
const OSSL_ACKM_ACK *ossl_ackm_get_ack_frame(OSSL_ACKM *ackm, int pkt_space);
Is ACK Desired
This returns 1 if the ACK manager thinks an ACK frame ought to be generated and
sent at this time. ossl_ackm_get_ack_frame will always provide an ACK frame
whether or not this returns 1, so it is suggested that you call this function
first to determine whether you need to generate an ACK frame.
The return value of this function can change based on calls to
ossl_ackm_on_rx_packet and based on the passage of time (see
ossl_ackm_get_ack_deadline).
int ossl_ackm_is_ack_desired(OSSL_ACKM *ackm, int pkt_space);
Get ACK Deadline
The ACK manager may defer generation of ACK frames to optimize performance. For example, after a packet requiring acknowledgement is received, it may decide to wait until a few more packets are received before generating an ACK frame, so that a single ACK frame can acknowledge all of them. However, if further packets do not arrive, an ACK frame must be generated anyway within a certain amount of time.
This function returns the deadline at which the return value of
ossl_ackm_is_ack_desired will change to 1, or OSSL_TIME_INFINITY, which
means that no deadline is currently applicable. If the deadline has already
passed, it may either return that deadline or OSSL_TIME_ZERO.
OSSL_TIME ossl_ackm_get_ack_deadline(OSSL_ACKM *ackm, int pkt_space);
Is RX PN Processable
Returns 1 if the given RX packet number is “processable”. A processable PN is one that is not either
-
duplicate, meaning that we have already been passed such a PN in a call to
ossl_ackm_on_rx_packet; or -
written off, meaning that the PN is so old that we have stopped tracking state for it (meaning we cannot tell whether it is a duplicate and cannot process it safely).
This should be called for a packet before attempting to process its contents. Failure to do so may may result in processing a duplicated packet in violation of the RFC.
The returrn value of this function transitions from 1 to 0 for a given PN once
that PN is passed to ossl_ackm_on_rx_packet, thus this function must be used
before calling ossl_ackm_on_rx_packet.
int ossl_ackm_is_rx_pn_processable(OSSL_ACKM *ackm, QUIC_PN pn, int pkt_space);
Get Probe Packet
This determines if the ACK manager is requesting any probe packets to be transmitted.
The user calls ossl_ackm_get_probe_request. The structure pointed
to by info is filled and the function returns 1 on success.
The fields of OSSL_ACKM_PROBE_INFO record the number of probe requests
of each type which are outstanding. In short:
-
handshakedesignates the number of ACK-eliciting Handshake packets being requested. This is equivalent toSendOneAckElicitingHandshakePacket()in RFC 9002. -
padded_initialdesignates the number of ACK-eliciting padded Initial packets being requested. This is equivalent toSendOneAckElicitingPaddedInitialPacket()in RFC 9002. -
ptodesignates the number of ACK-eliciting outstanding probe events corresponding to each packet number space. This is equivalent toSendOneOrTwoAckElicitingPackets(pn_space)in RFC 9002.
Once the caller has processed these requests, the caller must clear these
outstanding requests by calling ossl_ackm_get_probe_request with clear set
to 1. If clear is non-zero, the current values are returned and then zeroed,
so that the next call to ossl_ackm_get_probe_request (if made immediately)
will return zero values for all fields.
typedef struct ossl_ackm_probe_info_st {
uint32_t handshake;
uint32_t padded_initial;
uint32_t pto[QUIC_PN_SPACE_NUM];
} OSSL_ACKM_PROBE_INFO;
int ossl_ackm_get_probe_request(OSSL_ACKM *ackm, int clear,
OSSL_ACKM_PROBE_INFO *info);
Get Largest Unacked Packet Number
This gets the largest unacknowledged packet number in the given packet number
space. The packet number is written to *pn. Returns 1 on success.
This is needed so that packet encoders can determine with what length to encode the abridged packet number in the packet header.
int ossl_ackm_get_largest_unacked(OSSL_ACKM *ackm, int pkt_space, QUIC_PN *pn);
Callback Functionality
The ACK manager supports optional callback functionality when its deadlines are updated. By default, the callback functionality is not enabled. To use the callback functionality, call either or both of the following functions with a non-NULL function pointer:
void ossl_ackm_set_loss_detection_deadline_callback(OSSL_ACKM *ackm,
void (*fn)(OSSL_TIME deadline,
void *arg),
void *arg);
void ossl_ackm_set_ack_deadline_callback(OSSL_ACKM *ackm,
void (*fn)(OSSL_TIME deadline,
int pkt_space,
void *arg),
void *arg);
Callbacks can be subsequently disabled by calling these functions with a NULL
function pointer. The callbacks are not called at the time that they are set,
therefore it is recommended to call them immediately after the call to
ossl_ackm_new.
The loss detection deadline callback is called whenever the value returned
by ossl_ackm_get_loss_detection_deadline changes.
The ACK deadline callback is called whenever the value returned by
ossl_ackm_get_ack_deadline changes for a given packet space.
The deadline argument reflects the value which will be newly returned by the
corresponding function. If the configured callback calls either of these
functions, the returned value will reflect the new deadline.